ECU for MX2

Hello.
The CTW ECU Full and Burst are avaliable for sell, now what is the best buy:
Etiny advanced mini mosfet + burst/auto ECU for Celcius CTW
OR
Dynamic Ecu (Full Auto & Burst) CTW MX3

Thaks

I'd better stays with ETiny, as MX3 is not yet field tested for a reasonable time.

I agree - I have seen the new CTW one at JD, but they havent installed it in a players gun (although they have tested it in a weapon on the range and it does work).

JD are getting some E-Tiny ones in (about 2 weeks away) so hang on (got one on order hence why I know).

Mmm, seconded to wait for JD and the etiny

I've ordered ETiny from www.powair6.com - got it in a week or so.

Hi,

ive got the Etiny EL001 and EL003.

they work without problemes.
the EL003 is realy "tiny"

You can adjust bust/FA and the blue LED insentity via
trigger.

this setup works perfect for me.

Got Dynamic ECU yesterday It's actually black, looks great in my CTW. The new sensor is very nice. I prefer to use the original ECU, coz I'm planing to buy the MX3 mosfet unit.

nice .. they use the same LEDs that i use as a sparepart for
a damaged one ..

Twingear, does this new ECU fixes overspin?

How much is the mx3 ecu compared to the 60 odd quid for the etiny?

Spike Viper, I had over spin only when I use 11.1v 2400mAh, not with 11.1 1200mAh. My PTW does the same with 11.1v 2400mAh.

Joe90 wrote:How much is the mx3 ecu compared to the 60 odd quid for the etiny?

About the same..

twingear wrote:Spike Viper, I had over spin only when I use 11.1v 2400mAh, not with 11.1 1200mAh. My PTW does the same with 11.1v 2400mAh.

Hmmm. Than I'm lucky. I've got overspin on 11.1 1200mah 20C battery on both CTWs.

Me too, got a new set of brushes on the way so it may have been that though

What the diferences you see about the new ECU and yhe old one?
More ROOF?

The ECU does not control the rate of fire, it is just the sensor which tells the MOSFET board to go and stop.

The new CTW ECU is supposed to be more sensitive and allows a greater degree of flexibility of adjusting the light level on the LED.

It also apparantly a system which will indicate if you have pulled the trigger for more than 3 seconds which will invalidate the warranty as supplied in the UK by STTS..... big brother is watching us lads!!!!

The new CTW MOSFET gives a ROF of 29 BB's a second apparently - so with my maths, a 3 second burst and your mags empty anyway......

BRING THE NOISE

Sunray wrote:It also apparantly a system which will indicate if you have pulled the trigger for more than 3 seconds which will invalidate the warranty as supplied in the UK by STTS..... big brother is watching us lads!!!!

lolwut? Thats crazy...