Hey guys I just found my own way to make a 130rd high cap mag into a 118 or so rd mag for nothing. I can't actually test it out being I'm waiting on my gun but I can feel a change in pressure at the top which is the kep to more speed.
Look up on you tube how to take mag apart ( very easy just don't loose any parts)
I did 7 mags apart and back together in 1 hours
The key to this is to place 14 bbs in the track. Then put the spring in just a little snap the two halves back together leaving the top where the lip is somewhat apart and feed the spring back into the mag. MAKE SURE THE BBS ARE SIDE BY SIDE at the bottom. Basically your putting bbs at the bottom where the spring would sit so your raising the spring. Here's a pic of what I'm talking about :
![130rd high cap mag to speed mag tutorial Img-2016](https://i.servimg.com/u/f64/15/54/11/52/img-2016.jpg)
Look up on you tube how to take mag apart ( very easy just don't loose any parts)
I did 7 mags apart and back together in 1 hours
The key to this is to place 14 bbs in the track. Then put the spring in just a little snap the two halves back together leaving the top where the lip is somewhat apart and feed the spring back into the mag. MAKE SURE THE BBS ARE SIDE BY SIDE at the bottom. Basically your putting bbs at the bottom where the spring would sit so your raising the spring. Here's a pic of what I'm talking about :
![130rd high cap mag to speed mag tutorial Img-2016](https://i.servimg.com/u/f64/15/54/11/52/img-2016.jpg)