Home
Perhaps some of you know this, but maybe not. I figured I'd pass on this little trick to all the Systema PTW owners out there.
All PTW's can be either full auto or burst. They all have the capability to do both, regardless of which way you bought it.
If you have a burst gun and want full auto, or have an auto gun and want burst, just do this:
The main circuit board in the gun, EL-001, which is the longer one of the two sitting just forward of the gearbox, has three marked dual-solder points on it: P1, P2 and P3.
P1 is the key here.
If the two P1 solder joints are soldered together, you have burst.
If the two P1 solder joints are separate, you have full auto.
So, if you bought an auto gun and want burst, solder P1 together. If you have burst and want auto, use solder wick or a solder-sucker to seperate the P1 connection.
Could this be done on a CTW MX2 ???
I used to have Burst on my old PTW i had 3 years ago. I loved it and i was thinkin perhaps this could be done om my CTW too ??
