Stock tube lipo mod

Hi everyone!

Could someone provide me with an instruction on how to modify the CTW stock tube to fit lipo battery and T-shaped connectors? As far as I tried, nothing helps me to suit 11.1 1200mah battery without wires tangeling in all directions...

Thanks in advance!

The easiest way is to get the mini mosfet board as trying to do it with the standard CTW one is a bloody headache as its just too big.

as Sunray said, the CTW powerboard is different to the PTW, so the lipo mod cannot really be replicated (which involves rewiring and chopping down the powerboard/heatsink. (not just modifying the tube)

I retail a mini powerboard as described here if interested.
https://celcius-ctw.forumotion.com/t318-electronic-upgrades-for-celcius


Thanks

I know you can source the mini-mosfets from PTW airsoft here in the UK and via the same person on eBay, but I have spoken to Etiny on a few occasions and he seams a great guy.

post removed

It's not a problem to get the shortened board, some guy here create a custom power board.



The main thing is the following: reducing power board is not the top priority for me, it's ok to have the battery sticking from the tube for 1.5 centimeters. I've got the problems with the wiring. The wires from the battery and powerboard are not fitting well in the tube. Powerboard's wires are already resoldered with the straight ones.

*EDITED*

I edited my posts for lack of information..

If you have any reliable information, feel free to inform us - the users of this forum.

I'm sorry for any inconvenience.

I did total up-grade with a 3 round-burst! Just go here and get everything you need. hotspotairsoft.com

Standinman

Does anyone have a wiring diagram ECU Mosfet Board?